Ricoh SP C340DN User Manual page 80

3. Troubleshooting
Message
"SD Card authentication has
failed. Please call service."
"Tray setg. do not match
spcfd siz&typ. Select new
tray or use siz&typ below."
"Waste Toner Bottle is full.
Replace the bottle."
Messages during Direct print from a memory storage device
Message
"Unable to access the
specified memory storage
device."
78
Cause
Authentication from the SD card
failed.
The printer driver settings are
incorrect or the tray does not
contain paper of the size or type
selected in the printer driver.
The waste toner bottle is full.
Causes
The memory device used cannot
be recognized.
Solution
Turn the printer off, and then turn it
on again. If the problem persists,
contact your sales or service
representative.
• Check that the printer driver
settings are correct, and then
load paper of the size
selected in the printer driver
into the input tray. For details
about how to load paper,
see page 35 "Loading
Paper".
• Select the tray manually to
continue printing, or cancel
a print job. For details about
how to select the tray
manually, or cancel a print
job, see "If an Error Occurs
with the Specified Paper Size
and Type", Operating
Instructions.
Replace the waste toner bottle.
For details, see "Replacing Other
Consumables", Operating
Instructions.
Solutions
For details about the
recommended memory devices
for the Direct printing function
from memory storage devices,
contact your service
representative. The USB flash
memory device that features
password protection or other
security features may not work
normally.