Ricoh SP C340DN User Manual page 75

Message
"Supply order has failed."
"This NetBIOS name is
already in use.(108/208)"
"The same IPv4 Address
already exists.(102/202)"
"The selected job has
already been printed or
deleted."
" Toner is almost empty."
"USB has a problem. /
Please call service."
"Values set for IPv6/
Gateway addresses are
invalid.(110/210)"
"WPA Auth. incomplete.
(211)"
Cause
The automatic supply order failed. The message indicates the printer
The NetBIOS name specified for
the printer is already used by
another device on the network.
The IPv4 address specified for the
printer is already used by another
device on the network.
This message might appear if you
print or delete a job from Web
Image Monitor.
The print cartridge is almost
empty.
The printer has detected a USB
board failure.
The IPv6 address or gateway
address is invalid.
WPA authentication could not be
completed.
When Messages Are Displayed
Solution
tried to order the supplies.
Contact your network
administrator.
Contact your network
administrator.
Press Exit on the message screen.
For details, see "Replacing the
Print Cartridge", Operating
Instructions.
Turn the printer off, and then turn it
on again. If the problem persists,
contact your sales or service
representative.
Check the network settings.
Contact your network
administrator.
73