Ricoh SP C340DN User Manual page 114

3. Troubleshooting
Problem
It takes too long to resume
printing.
It takes too long to complete the
print job.
Attached options are not
detected in the printer
properties.
When printing combined prints
or bound prints.
An empty tray is selected by
Auto Tray Select, and the
document is not printed due to
out of paper error.
112
• The data is so large or complex that it takes time to process it.
If Data In indicator is flashing, the data is being processed.
Wait until it resumes.
• The printer was in the Energy Saver mode or the Sleep mode.
To recover from these modes, the printer must warm up, and
this takes time until printing starts. For details, see page 27
"Saving Energy".
• Photographs and other data-intensive pages take a long time
for the printer to process, so wait when printing such data.
Changing the settings with printer driver may help to speed up
printing. For details, see the printer driver's Help.
• The data is so large or complex that it takes time for the printer
to process it. If Data In indicator is flashing, the data is being
processed. Wait until it resumes.
• If "Waiting for print data..." appears on the display, the printer
is now warming up. Wait for a while. The printer is adjusting
the color registration. Wait for a while.
The computer and printer are not in bidirectional communication.
You must configure attached options in the printer properties. For
details, see the printer driver's Help.
Check that the paper size and direction set in the printer driver are
the same as those set in the application.
If the settings are not the same, change the settings of the printer
driver.
If a paper tray is opened and closed while the printer is in Energy
Saver mode, the printer will initialize the tray upon recovery, but
the tray will not be selectable by Auto Tray Select.
To print from a paper tray that you opened and closed while the
printer was in Energy Saver mode, you must manually specify the
tray as the source paper tray before printing. When the printer
recovers from Energy Saver mode and completes initialization, it
will then print the document from the tray you have specified.
Solutions