Pager Call - Panasonic KX-FP121 Operating Instructions Manual

Receiving Faxes

Pager call

This feature allows your unit to call your pager when your unit receives a fax document and/or incoming
messages.
1 MENU
Press .
Display:
2
Press , then 7 0
3
Press START/SET/COPY
4 Press or to select "ON".
If this feature is not required, select "OFF".
5
Press START/SET/COPY
6
Enter your pager number.
You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP
Your pager
number
How your unit and pager work
When your unit receives
a fax document and/or
incoming messages, it will
call your pager company.
80
1.SYSTEM SET UP
.
PAGER TRANSFER
.
MODE=OFF
MODE=ON
.
NO.=
Pauses
Your pager access
code, if required.
Your pager
company
Your pager
company will
call your pager.
7
Press START/SET/COPY
The unit will dial the stored number.
8 Confirm if the message is displayed on
your pager.
9
Press
DIGITAL SP-PHONE
10 Press
AUTO ANSWER
TAD/FAX mode (p. 84).
/
1 2 3
4 5 6
7 8 9
0
REDIAL/PAUSE
(Pause)
DIGITAL SP-PHONE
Pager
A few minutes later, your pager will beep and
display as follows;
— "11" : when your unit received incoming messages.
— "22" : when your unit received a fax document.
If you have subscribed to a Caller ID service and
the Caller ID information (telephone number) is
received, your pager will display the telephone number
before the number "11" or "22".
.
PAGER TEST
.
to activate the
AUTO ANSWER
TAD/FAX ON
MENU
ON
START/SET/COPY