Receive Mode - Panasonic KX-FP121 Operating Instructions Manual

Operations

Receive mode

Problem
I cannot select the desired receive
mode.
Copying
Problem
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied documents.
The copied image is distorted.
The printing quality is poor.
The printing is faint.
Original
A BC
Answering device
Problem
No voice messages have been
recorded in the TAD/FAX mode.
I cannot retrieve recorded messages
from a remote telephone.
108
If you set the TAD/FAX, FAX ONLY or TEL/FAX mode:
– Select the desired mode using feature #77 (p. 67), and
– Press
If you set the TEL mode:
– Press
You cannot make a copy during programming. Try to make a
copy after programming or stop the programming.
The glass or rollers are dirty. Clean them (p. 115).
The thermal head is dirty. Clean it (p. 115).
Some paper has instructions recommending which side to print
on. Try turning the paper over. We recommend smooth paper
such as Hammermill Jet Print for clearer printing.
You may have used paper with a cotton and/or fiber content that
is over 20%, such as letterhead or resume paper. We recommend
Copy
smooth paper such as Hammermill Jet Print for clearer printing.
The memory is full. Erase some or all the messages (p. 90, 96).
Make sure that you use the remote operation ID correctly (p. 94).
For assistance, call 1-800-435-7329.
Cause & Remedy
to turn on the AUTO ANSWER light.
AUTO ANSWER
to turn off the AUTO ANSWER light.
AUTO ANSWER
Cause & Remedy
R
R
Cause & Remedy
AUTO ANSWER
TAD/FAX ON
ON
AUTO ANSWER
TAD/FAX ON
OFF