Multiple Stations - Panasonic KX-FP121 Operating Instructions Manual

Multiple stations

This feature is useful when you send the same documents to selected parties whose telephone numbers are
stored in a One-Touch Dial key and the JOG DIAL directory. You must program the desired parties into one of
the BROADCAST key (One-Touch Dial key 1, 2 or 3).
Important:
Before programming, make sure that the desired telephone numbers have been stored into a One-Touch
Dial key or the JOG DIAL directory.
The BROADCAST key can be used as One-Touch Dial key 1, 2 or 3 or as the broadcast key.
Programming the BROADCAST key with telephone numbers
1 DIRECTORY PROGRAM
Press
Display:
2
Press BROADCAST
3
Press or to select "BROADCAST 1 (2 or 3)".
Example:
4
Press START/SET/COPY
5
Enter the station.
a: Using a One-Touch Dial key:
For stations 1–3 which are not used as the
BROADCAST key, press the preset
One-Touch Dial key.
For stations 4–6, press
the preset One-Touch Dial key.
Example:
b: Using the JOG DIAL directory:
Rotate JOG DIAL
displayed.
Example:
Press START/SET/COPY
Example:
To enter other stations, repeat this step (up to
20 stations).
.
PRESS STATION
OR USE JOG-DIAL
.
DIAL MODE
BROADCAST 1
.
DIR= [000]
LOWER
, then press
DIR=Luke [001]
until the desired name is
John [001]
.
John [002]
Sending Faxes
6
Press START/SET/COPY
all of the desired stations.
PRESS STATION
OR USE JOG-DIAL
To program another BROADCAST key,
repeat steps 2 to 6.
7 Press DIRECTORY PROGRAM
the program.
BROADCAST
/
One-Touch Dial keys
1 2 3
5 6
4
7 8 9
0
STOP
START/SET/COPY
DIRECTORY PROGRAM
Note:
If you make a mistake while programming,
press STOP , then make the correction.
Confirm the stored numbers by printing a
broadcast list (p. 116).
after entering
REGISTERED
to exit
/
JOG DIAL
LOWER
59