Panasonic KX-FP121 Operating Instructions Manual page 97

Changing to the TEL mode
You can change the setting of the receive mode from TAD/FAX to TEL from a remote location.
1. Call your unit.
2. Enter your remote operation ID.
3. Press 8 0 .
Turning the message transfer on or off
You must pre-program a transfer telephone number (p. 100) before using this feature.
Press 8 1 to turn ON the message transfer.
Press 8 2 to turn OFF the message transfer.
— If a transfer telephone number is not programmed,
you cannot turn this feature ON. The voice guide will
prompt you.
Turning the pager call on or off
You must pre-program a pager number (p. 80) before using this feature.
Press 8 3 to turn ON the pager call.
Press 8 4 to turn OFF the pager call.
— If a pager number is not programmed, you cannot
turn this feature ON. The voice guide will prompt you.
Skipping the greeting message
Press 0 during the greeting message playback.
— The unit will skip the rest of the greeting message.
Remote Operation
Voice guide example:
Message transfer is set.
Transfer phone number is 123456789.
Message transfer is off.
Transfer phone number is not set.
Voice guide example:
Pager call is set.
Pager number is 098765432.
Pager call is off.
Pager number is not set.
97