Panasonic KX-FP105RS Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Fax Machine
  5. KX-FP105RS
  6. Service manual
Panasonic KX-FP105RS Service Manual

Panasonic KX-FP105RS Service Manual

Compact plain paper fax
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Please file and use this manual together with the service manual for Model No. KX-FP101AL, Order
No.KM79909316C3. This Service Manual indicates the main differences between; Original KX-FP101AL
and KX-FP105RS.
Compact Plain Paper FAX
KX-FP105RS
(for Russia)
© 2000 Kyushu Matsushita Electric Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. KMF0002387A3
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-FP105RS

Summary of Contents for Panasonic KX-FP105RS

  • Page 1 (for Russia) Please file and use this manual together with the service manual for Model No. KX-FP101AL, Order No.KM79909316C3. This Service Manual indicates the main differences between; Original KX-FP101AL and KX-FP105RS. © 2000 Kyushu Matsushita Electric Co., Ltd. All rights reserved.

  • Page 2: Personal Safety Precautions

    KX-FP105RS 1 INTRODUCTION 1.1. AC CAUTION Change from original page 4 (1.5. AC CAUTION) For safety, before closing the lower cabinet, please make sure of the following precautions. 1. The earth lead is fixed with the screw. 2. The AC connector is connected properly.
  • Page 3 KX-FP105RS 1.3. FEATURES Change from original page 6 (1.8. FEATURES) General · Help function Display: 1. HOW TO SET UP 2. EASY DIAL 3. FAX RECEIVING · LCD (Liquid Crystal Display) readout · TAM (Telephone answering machine) interface Plain Paper Facsimile Machine ·...

  • Page 4: Specifications

    KX-FP105RS 1.4. SPECIFICATIONS Change from original page 7 (1.9. SPECIFICATIONS) Applicable Lines: Public Switched Telephone Network Document Size: Max. 216 mm (8 1/2") in width Max. 600 mm (23 5/8") in length Effective Scanning Width: 208 mm (8 3/16") Recording Paper Size: A4: 210×297 mm (8 1/4"×11 11/16")
  • Page 5 KX-FP105RS 1.5. CCITT Test Chart Change from original page 8 (1.11. ITU-T Test Chart (Actual size))

  • Page 6: Location Of Controls

    KX-FP105RS 1.6. LOCATION OF CONTROLS 1.6.1. OVERVIEW Change from original page 9 (1.12.1. OVERVIEW) Note: · The document and recording paper will be ejected from the front of the unit. Do not put anything in front of the unit.

  • Page 7: Control Panel

    KX-FP105RS 1.6.2. CONTROL PANEL Change from original page 10 (1.12.2. CONTROL PANEL)
  • Page 8 KX-FP105RS 1.7. CONNECTIONS Change from original page 11 (1.13. CONNECTIONS) Note: When you operate this product, the power outlet should be near the product and easily accessible.

  • Page 9: Installation

    KX-FP105RS 1.8. INSTALLATION 1.8.1. TO SELECT CHARACTERS WITH THE DIAL KEYPAD Change from original page 18 (1.14.10. TO SELECT CHRACTERS WITH THE DIAL KEYPAD) Note: A hyphen entered in a telephone number is counted as two digits.

  • Page 10: Troubleshooting Guide

    KX-FP105RS 2 TROUBLESHOOTING GUIDE 2.1. PROGRAM MODE TABLE Change from original pages 60, 61 ([2. Program Mode Table] in 2.3.3.3.2. Remote programming) 2. Program Mode Table Code Function Set Value Default Remote Setting Set date and time mm/dd/yy hh:mm Jan/01/99...
  • Page 11 KX-FP105RS Code Function Set Value Default Remote Setting Receive error limit value 001~999 Transmit level set -15~00dBm Receiving Sensitivity 20~48 ECM frame size 1: 256 byte / 2: 64 byte 256 byte Warning list printing 1:ON / 2:OFF EXT. TAM OGM Rec. time...
  • Page 12 IC501 CN505 ASIC OP-RESET ADR[15:13] KSTART,KLATCH KSCLK,KTXD RBA[6:0] OP-PANEL ADR[12:0] KRXD,JOG1,JOG2 DB[7:0] CN504 F1,FTG CISLEDON VIDEO IC502 IC504 IC503 IC505 CN508 SRAM DRAM MODEM THDAT,THCLK,THLAT IC550 STB1,STB2,STB3 THRMAL A[4:0] A[17:0] A[16:0] A[9:0] HEAD +24V D[7:0] D[7:0] D[7:0] D[7:0] +24V XROMCS XRAS XCAS CN507...
  • Page 13 KX-FP105RS 2.3. Analog Board Section Change from original pages 71, 72 (2.3.3.5. Analog Board Section) This chapter provides the testing procedures required for the analog parts. A signal route to be tested is determined depending upon purposes. For example, the handset TX route begins at the handset microphone and the signal is output to the telephone line.
  • Page 14 KX-FP105RS 1. Defective ITS (Integrated Telephone System) Section a. No handset and monitor Perform a signal test in the ITS or the NCU section and locate a defective point (where the signal disappears) on each route between the handset microphone and telephone line (sending), or between the telephone line and the handset speaker (receiving), or between the telephone line and the speaker (monitor).

  • Page 15: User Mode

    KX-FP105RS 2.4. USER MODE (The list below is an example of the SYSTEM SETUP LIST the unit prints out.) Change from original page 83 (2.4.3. USER MODE (The list below is an example of the SYSTEM SETUP LIST the unit prints out.

  • Page 16: Service Function Table

    KX-FP105RS 2.5. SERVICE FUNCTION TABLE Change from original pages 84, 85 (2.4.4. SERVICE FUNCTION TABLE) Code Function Set Value Effective Range Default Remarks Pause time set X 100 msec 001~600 ---------- Flash time set X 10 msec 01~99 ---------- Dial speed select...
  • Page 17 KX-FP105RS Code Function Set Value Effective Range Default Remarks No voice detect time X100 msec 01~99 Sets the silent call confirmation detection time. Transmit speed selection 1:9600BPS 2:7200BPS Adjusts the speed to start training during 3:4800BPS 4:2400BPS FAX transmission. Receive speed selection...

  • Page 18: Service Mode Settings (Example Of A Printed Out List)

    KX-FP105RS 2.6. SERVICE MODE SETTINGS (Example of a printed out list) Change from original page 86 (2.4.5. SERVICE MODE SETTINGS (Example of a printed out list)) Note: The above values are the default values.
  • Page 19 KX-FP105RS 2.7. Descriptions of the HISTORY Report Change from original page 88 (2.4.6.1. Descriptions of the HISTORY Report) (1) ROM VERSION EPROM version (2) SUM EPROM internal data calculation. (3) YOUR LOGO The user logo recorded in the unit. If it is not recorded, NONE will be displayed.

  • Page 20: Button Code Table

    KX-FP105RS 2.8. BUTTON CODE TABLE Change from original page 97 (2.5.2. BUTTON CODE TABLE) Note: These codes (00, 01) are only for the data in the History Report.

  • Page 21: Disassembly Instructions

    KX-FP105RS 3 DISASSEMBLY INSTRUCTIONS Change from original pages 109 and 116 (4 DISASSEMBLY INSTRUCTIONS)
  • Page 22 KX-FP105RS...

  • Page 23: Circuit Operations

    KX-FP105RS 4 CIRCUIT OPERATIONS 4.1. CONNECTION DIAGRAM Change from original page 119 (6.1. CONNECTION DIAGRAM) CN501 CN101 TO TEL LINE CN103 BELL TO EXT. TEL CN104 P-SHORT LINE RLY BREAK LINE RX MOD RX LINE TX CN504 CN502 CN102 CN105...
  • Page 24 OPERATION PANEL SWITCHING POWER SUPPLY LCD PANEL COVER SENSOR OPEN DC/DC RECTIFIER READ CONVERTER CN304 POSITION NOISE IC301 FILTER +24V KEY MATRIX DIGITAL P.C.B +5V +24V CN505 ANALOG P.C.B +5V/BATT CN501, CN502 IC503 IC502 IC504 CN511 FILM END DRAM SRAM PAPER TOP 4Mbit 4Mbit...
  • Page 25 KX-FP105RS 4.3. Descriptions of Pin Distribution (IC501) Change from original page 126~128 (Descriptions of Pin Distribution (IC501) in 6.3. CONTROL SECTION) SIGNAL POWER SUPPLIED VOLTAGE DESCRIPTION AIN1 3.3V CCD IMAGE SIGNAL INPUT AIN2 3.3V THERMISTOR TEMPERATURE WATCH INPUT AIN3 3.3V...
  • Page 26 KX-FP105RS SIGNAL POWER SUPPLIED VOLTAGE DESCRIPTION XHOLDAK NOT USED VDD (3.3V) 3.3V POWER SOURCE (+3.3V) XOUT 3.3V SYSTEM CLOCK (24MHz) 3.3V SYSTEM CLOCK (24MHz) POWER SOURCE (GND) VDD (5V) POWER SOURCE (+5V) XTEST 24MHz CLOCK CPUCLK NOT USED TEST1 HIGH FIXED...
  • Page 27 KX-FP105RS SIGNAL POWER SUPPLIED VOLTAGE DESCRIPTION IOP93 OUTPUT PORT (CIS LED ON) XRESET RESET INPUT XORESET RESET OUTPUT VDD (5V) POWER SOURCE (+5V) POWER SOURCE (GND) XRESETI RESET INPUT WDERR WATCHED ERROR OUTPUT SIGNAL XRSTSWI INPUT PORT (MPOS) XRSTSWO NOT USED...

  • Page 28: Analog Unit Block Diagram

    KX-FP105RS 4.4. ANALOG UNIT BLOCK DIAGRAM Change from original page 160 (6.7.1. ANALOG UNIT BLOCK DIAGRAM)

  • Page 29: Line Amplifier And Side Tone Circuit

    KX-FP105RS 4.5. LINE AMPLIFIER AND SIDE TONE CIRCUIT Change from original page 162 (6.8.5. LINE AMPLIFIER AND SIDE TONE CIRCUIT) 1. Circuit Operation The reception signal output from the line transformer T101 is input to pin (6) of IC101 via C126 and R131, and then the signal is amplified at pin (7) of IC101 and sent to the reception system at 5dB.

  • Page 30: Operation Board Section

    KX-FP105RS 4.7. OPERATION BOARD SECTION Change from original page 166 (6.10. OPERATION BOARD SECTION) The unit consists of a LCD (Liquid crystal display), KEYs and LEDs (light-emitting diodes). They are controlled by the Gate Array (IC301) and ASIC (IC501: on the DIGITAL BOARD). (Fig.-a)

  • Page 31: Schematic Diagram

    KX-FP105RS 5 SCHEMATIC DIAGRAM 5.1. SCHEMATIC DIAGRAM(ANALOG BOARD) Change from original page 179 (11 SCHEMATIC DIAGRAM (ANALOG CIRCUIT)) FAX TX Signal FAX RX Signal HANDSET, MONITOR FAX RX HANDSET FAX TX ( ): NOT USED NC: NO COMPONENT...
  • Page 32 KX-FP105RS 5.2. MEMO...

  • Page 33: Cabinet, Mechanical And Electrical Parts Location

    KX-FP105RS 6 CABINET, MECHANICAL AND ELECTRICAL PARTS LOCATION 6.1. OPERATION PANEL SECTION Change from original page 191 (18.1. OPERATION PANEL SECTION)

  • Page 34: Lower/P.c.b. Section

    KX-FP105RS 6.2. LOWER/P.C.B. SECTION Change from original page 194 (18.3. LOWER/P.C.B. SECTION)

  • Page 35: Replacement Parts List

    Ref. Part No. Part Name & Description Remarks PARTS LIST) PFGP1131Z LED COVER, A This replacement parts list is for KX-FP105RS only. PFBC1037Z1 BUTTON, STOP PFBC1030Z1 BUTTON, START Refer to the simplified manual (cover) for other areas. Not Used Notes:...

  • Page 36: Digital Board Parts

    KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks PFHX1272Z SHEET, CIS LED PFDG1082Z GEAR, PLATEN ROLLER PQHM112Z CLAMPER PFDJ1011Z PLATEN SUPPORT Not Used PFDN1028Z ROLLER, PLATEN PFNW1006Z WASHER PFDG1027Y GEAR, PLATEN DRIVE...
  • Page 37 KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks (ICS) L517 PQLQR2KA20T COIL L518 PQLQR2KA113T COIL IC501 PFVIM66410G1 IC502 PFWIFP105RS IC (ROM) IC503 PFVIMS5148F (CRYSTAL OSCILLATIONS) IC504 PFVIGM6256FF IC505 PFVIR676812 X501 PFVCCFS32Z...
  • Page 38 KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R566 ERJ3GEY0R00 R687 ERJ3GEYJ103 R567 ERJ3GEYJ104 100K R689 ERJ6GEY0R00 R570 ERJ3EKF1101 R690 ERJ3GEYJ101 R571 ERJ3EKF4701 R691 ERJ3GEYJ101 R573 ERJ3GEYJ472 4.7K R692 ERJ3GEYJ101 R574 ERJ3GEYJ272 2.7K...

  • Page 39: Analog Board Parts

    KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C560 ECUV1H104ZFV (FUSES) C564 ECUV1C224ZFV 0.22 C569 ECUV1H333KDV 0.033 F501 XBAPF001312 FUSE F502 PFRB001251KC FUSE C575 ECUV1H333KDV 0.033 F503 PFRB002122KZ FUSE C578 ECUV1H100DCV...
  • Page 40 KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks LF101 PFLE003 COIL R123 PQ4R10XJ222 2.2k R124 PQ4R10XJ303 R125 PQ4R10XJ102 (CERAMIC FILTERS) R126 ERJ6GEY0R00 R127 PQ4R10XJ563 L106 PFVF2A102ST CERAMIC FILTER R128 PQ4R10XJ511 L107...

  • Page 41: Operation Board Parts

    KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C125 PQCUV1H121JC 120P R305 ERJ3GEYJ181 C126 PQCUV1E104MD R306 ERJ3GEY0R00 C127 PQCUV1H121JC 120P R307 ERJ3GEYJ181 C128 PQCUV1H104ZF R308 ERJ3GEYJ181 C129 ECEA1HKS100 R309 ERJ3GEYJ181 C131...

  • Page 42: Power Supply Board Parts

    KX-FP105RS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks SW322 EVQ11Y05B SWITCH, MENU R108 ERDS2FJ150 SW323 EVQ11Y05B SWITCH, RESOLUTION R109 ERDS2FJ100 SW324 EVQ11Y05B SWITCH, QUICK SCAN R110 ERG2DJ204 200K SW325 EVQ11Y05B SWITCH, ONE 3,6...

  • Page 43: Hook Board Parts

    KX-FP105RS Ref. Part No. Part Name & Description Remarks ZNR101 ERZV10DK751U VARISTOR (OTHERS) T101 ETS29AK428AC TRANSFORMER TH101 PFRRT09L8R2F THERMISTOR 7.6. HOOK BOARD PARTS Ref. Part No. Part Name & Description Remarks PCB5 PFLP1169MZ-B OPERATION BOARD ASS´Y (RTL) (CONNECTOR) CN401 PFJS02Q24Z...

Table of Contents