Paper tray
1
Remove the shipping tape from the unit.
2
Insert the two tabs on the paper tray into the slots
on the back of the unit.
Do not place the unit in areas where the paper
tray may be obstructed by a wall, etc.
Paper stacker (purchasable accessory)
To stack printed paper, a paper stacker is available as an accessory. To order, see page 16.
1
Remove the shipping tape from the paper stacker.
2
Lift the front of the unit and insert the paper
stacker into the side slots.
3
Confirm if the paper stacker is locked into the
center slots.
Tabs
Slots
Side slots
Bottom
Paper
stacker
Setup
Shipping tape
Paper tray
Paper stacker
Center slots
(continued)
21