Ring Count In The Tad/Fax Mode - Panasonic KX-FP121 Operating Instructions Manual

Ring count in the TAD/FAX mode

This feature determines the number of rings before the unit answers a call in the TAD/FAX mode.
You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF.
TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are
any new voice messages. If the unit answers on the second ring, there is at least one new
recorded message. If the unit answers on the fourth ring, there are no new recorded
messages. To save the toll charges for the call, hang up immediately when you hear the third
ring. The third ring indicates that there are no new recorded messages.
RINGER OFF: The unit will answer without ringing.
Helpful hints:
To answer a call before the unit does, increase the number of rings.
If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1 Select "TAD/FAX" in step 4 of feature setting #77
(p. 67).
2
Press MENU .
Display:
3
Press , then
0 6
4
Press START/SET/COPY
5
Press or to select the desired setting.
6
Press START/SET/COPY
7
Press MENU .
Note:
If you subscribe to a Caller ID service, set this ring
count setting to 2 or more rings.
1.SYSTEM SET UP
.
TAD RING COUNT
.
RING=2
.
SETUP ITEM [ ]
Options
/
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
MENU
101