Tel Mode (Answering All Calls Manually); Memory Reception - Panasonic KX-FP121 Operating Instructions Manual

Receiving Faxes
TEL mode
(answering all calls manually)
Press
AUTO ANSWER
mode.
The display will show the following.
Display:
1
When the unit rings, press
or lift the handset to answer the call.
2 When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press START/SET/COPY
3
Replace the handset, if using it.
The unit will start reception.
Note:
If you do not answer the call within 15 rings, the unit
will temporarily activate the answering device. If you
want to change to the TAD/FAX mode, enter the
remote operation ID (p. 94) during the greeting
message.
To stop receiving
Press STOP .
Friendly reception feature
When you answer a call and hear a fax calling tone
(slow beep), the unit will automatically start receiving
even if you do not press START/SET/COPY
If this feature is not required, set to "OFF" (p. 79).
66
to turn off the AUTO ANSWER
TEL MODE
DIGITAL SP-PHONE
.
CONNECTING.....
.
Handset
STOP
START/SET/COPY
DIGITAL SP-PHONE

Memory reception

When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While documents are in memory, the unit will:
— display an error message and the following
message alternately.
Display:
— alert you with slow beeps (memory reception
alert).
Follow the instructions on pages 105 and 106 to
solve the problem and print the stored document.
For memory capacity, see page 123.
AUTO ANSWER
TAD/FAX ON
OFF
FAX IN MEMORY