Extension Telephone; Fax Activation Code - Panasonic KX-FP121 Operating Instructions Manual

Receiving Faxes

Extension telephone

When you connect an extension telephone on the same line, you can receive fax documents using the
extension telephone.
You do not have to go to the unit and press
Important:
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
1
When the extension telephone rings, lift the
handset of the extension telephone.
2
When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press 9 (pre-selected fax activation code)
firmly.
3
Hang up the handset.
The unit will start reception.

Fax activation code

The fax activation code is used when receiving faxes using an extension telephone (see above).
Important:
This code should be different from the remote operation ID (p. 94).
1
Press MENU .
Display:
2
Press , then 4
3 Press
START/SET/COPY
4
Press or to select "ON".
If this feature is not required, select "OFF".
5
Press START/SET/COPY
The display will show the pre-selected code.
6
Enter the new code.
This code can be from 2 to 4 digits in length
using 0–9, and .
7
Press START/SET/COPY
8 Press MENU .
76
START/SET/COPY
1.SYSTEM SET UP
1 .
FAX ACTIVATION
.
MODE=ON
.
CODE= 9
.
SETUP ITEM [
.
Extension telephone
Note:
You can change the fax activation code (see
below).
/
2 3
1
4 5 6
7 8 9
0
Note:
If you subscribe to some special telephone
company services which require a code, all
or part of the fax activation code must be
different from the service access code.
]
The fax activation code should not be set to
"0000".
To the same line
MENU
START/SET/COPY