Setup As Smtp Mail Server - Panasonic Panafax DX-1000 User Manual

01007000002

Setup as SMTP mail server

To install the DX-1000 as SMTP mail server, the following network parameters need to be programmed on
your network and on the DX-1000.
IP Address of the DNS Server (if not available, see Note)
IP Address of the DX-1000
Subnet Mask of the DX-1000
Name or IP Address of the Default SMTP mail server
IP Address of the Default Router
Email Address of the DX-1000 (see Note)
Host Name
Note:
Email Transmission (from the DX-1000 to a PC)
01007990002
Email reception (from a PC to the DX-1000)
01007990003
#@multitude
1. To function as SMTP mail server, the DX-1000's email address must include its unique Host name within
your company domain. This unique Host name must be registered within your network's DNS (Domain
Name System) server. Example: DX1000@fax01.panasonic.com
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP
Server Name. If the DNS Server is not available, change the Fax Parameter No. 94 (DNS SERVER) to
"1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP Server.
DX1000@fax01.panasonic.com
(Router)
popuser001@panasonic.com
DX1000@fax01.panasonic.com
(Router)
popuser001@panasonic.com
Pre Installation Information
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
(POP Server)
POP3
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP
1
13