Monitor Connection - EverFocus Paragon960 User Manual

2.3.1

Monitor Connection

You can connect the monitor to the HDMI, VGA or BNC port on the rear panel of the DVR. The DVR
provides 2 main monitor outputs with identical functionality - VGA and HDMI.
Both of the VGA and HDMI video outputs can be used simultaneously and deliver full HD
resolution (1920 x 1080, progressive, 60 Hz. Vert., 68 KHz hor.).
Make sure that the connected monitor's specifications comply with these resolution requirements.
HDMI Cable / VGA Cable
Note:
1. The connected monitors' specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters. The standard HDMI cables can
support cable length up to 3 meters. For longer distances, such as 15 meters, it is highly
recommended to use high quality HDMI cables.
Rear View
Main Monitor Call Monitor
Figure 2-30
BNC Cable
21
PARAGON960 x4 32CH