EverFocus Paragon960 User Manual page 25

c. Insert Black Long Screws into the Rubber Spacers, and screw the HDD at the bottom of the
DVR.
Figure 2-21
d. Use the supplied SATA Cable, and connect one end to the SATA port on the small PCB
inside the DVR, and the other end to the SATA port on the HDD.
Figure 2-22
e. Connect the internal power cable to the HDD.
Figure 2-23
Note: The internal power cable is connected to the Main board inside the DVR. The power
cable features two connectors, which can be used to connect to two HDDs.
13. Screw back the HDD Tray, the two Hot-swap HDD Brackets and connect the SATA and the
power cables to the two Hot-swap HDD Brackets.
Black Long
Screw
SATA and Power Cables
Hot-swap HDD Bracket
HDD Tray
Figure 2-24
16
PARAGON960 x4 32CH