EverFocus Paragon960 User Manual page 105

PARAGON960 x4 32CH
The total capacity of a RAID 5 array is the size of the smallest disk times (N-1) disks. For
example, a RAID 5 volume with three 200 GB disks and one 100 GB disk will have a total
capacity of 300 GB. {100 GB x (4-1) = 300 GB}.
RAID State: Shows the RAID and disk state. (No RAID, Broken, Degrade, Rebuilding, Normal,
EzBackup, Unknown, or System Error, No RAID Now. If connecting to more than one disk, it will
show Disk1, Disk2 ...DiskX is ok.)
To enable the RAID 5 function, follow the steps below:
1. Select RAID 5, the following message appears. Click Yes to configure the RAID settings. And
the NVR will automatically reboot.
Figure 6-27
2. Enter the RAID menu again, the RAID 5 is enabled.
96