Table of Contents
Advertisement
8
Enter
9
Menu/Esc
Jog / Shuttle
Wheel
Shuttle
10
Jog
Status LED
11
Alarm
12
13
USB2.0 Ports
DVD Burner
14
(Optional)
15
Display
16
Sequence
17
Zoom
Monitor
18
19
Search
20
Copy
21
IR Receiver
Use this button in conjunction with the Menu/Esc button (9) and the
Jog / Shuttle Wheel (10) to select menu values or to scroll between
menu categories. You can also use it in conjunction with a mouse or
you can use only a mouse to do these functions.
Press to enter/exit the Main Setup Menu.
Use the Shuttle (outer wheel) to:
In Playback mode, use the Shuttle wheel for fast forward / fast
reverse.
Switch between Menu options / parameters.
Highlight individual cameras.
Use the Jog (inner wheel) to:
In Pause mode, use the Jog to move frame by frame.
Switch between Menu options / parameters.
Highlight individual cameras.
: Indicates the power is on.
HD1: Indicates the internal Hard Disk is activating.
HD2: Indicates the external Hard Disk is activating.
LAN: Indicates the DVR is connected to the network.
Indicates an alarm input is triggered.
Two USB2.0 ports for connecting to a mouse or external storage device.
Use the DVD Burner for archiving the recordings from the DVR. It's
highly recommended to use a DVD with 4x or higher speed disc for
recording.
Press to cycle between the info display types (channel and status bar
info).
Press to enter the automatic sequence mode. This will show each
channel feed in sequence.
Press repeatedly to toggle between 2x and 4x zoom. Press the
Menu/Esc button to switch zoom off.
Press to switch between the Main and Call monitors. Just remember to
exit out of the setup menus before doing so.
Press to enter the Search Setup menu.
Press to enter the Copy Menu.
Receiver for signals from the IR remote control.
8
PARAGON960 x4 32CH
Advertisement
Table of Contents
