Power Conservation Modes - Schenker N151RF1 User Manual

Power Management

Power Conservation
3
Modes
The Power Saving set-
ting will result in maxi-
mum power saving, but
with the possible loss of
some performance.
Setting the mode to Bal-
ance will give power
saving matched
performance.
Performance will give
optimum computer per-
formance but with less
power conservation.
Note that the Energy
Star setting will put the
display into sleep after
no more than 15 min-
utes of user inactivity.
Figure 3 - 7
Control Center
3 - 12 Configuring the Power Buttons

Power Conservation Modes

This system supports Power Saving power management features that place comput-
ers (CPU, hard drive, etc.) into a low-power sleep modes after a designated period
of inactivity. Adjust Power Conservation Modes from the Control Center:
1. Press the Fn + Esc key combination to toggle the Control Center on/off.
2. Click either the Performance, Balanced or Power Saving button.
with