Schenker N151RF1 User Manual page 55


Disk Eject Warning
Don't try to eject a CD/DVD while the system is ac-
cessing it. This may cause the system to "crash". Stop
the disk first then eject it, or press the stop button
twice.
CD/DVD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to
an unexpected power interruption) you may push the
end of a straightened paper clip into the emergency
eject hole. Do not use a sharpened pencil or any ob-
ject that may break and become lodged in the hole.
Don't try to remove a floppy disk/CD/DVD while the
system is accessing it. This may cause the system to
"crash".

Changing DVD Regional Codes
Go to the Control Panel and double-click Device Man-
ager (Hardware and Sound), then click the + next to
DVD/CD-ROM drives. Double-click on the DVD-ROM
device to bring up the Properties dialog box, and se-
lect the DVD Region (tab) to bring up the control pan-
el to allow you to adjust the regional code (see
Regional Codes" on page 2 -
DVD region detection is device dependent, not OS-
dependent. You can select your module's region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer.
Quick Start Guide
"DVD
5).
Left View 1 - 21
1