Control Center; Power Modes; Control Center Menus - Schenker F516 Concise User Manual

Control Center

Press the Fn + Esc key combination,
or double-click the icon
tification area of the taskbar to tog-
gle the Control Center on/off. The
Control Center gives quick access to
frequently used controls and enables
you to quickly turn the camera/Touch-
pad on/off.
Figure 4 - Control Center

Power Modes

You can set a Power Mode by click-
ing the appropriate icon at the top of
in the no-
the Control Center. Each power
mode will affect the Power Conserva-
tion Mode, Airplane Mode, Power
Plan and PC camera power etc.

Control Center Menus

The Control Center contains 2 menu
headings (System Program and De-
vice) under the Power Modes. Click
the Control Center icons to toggle the
appropriate function, or hold the
mouse button down and move the dial
control where applicable. Certain
functions will automatically be adjust-
ed when a power mode is selected.
Click the menu headings and then
click any of the buttons.
Power Status
The Power Status icon will show
whether you are currently powered by
the battery, or by the AC/DC adapter
plugged in to a working power outlet.
The power status bar will show the
current battery charge state.
Brightness
The Brightness icon will show the
current screen brightness level. You
can use the slider to adjust the screen
brightness or the Fn + F8/F9 key com-
binations, or use the Fn + F2 key com-
bination to turn off the LED backlight
(press any key to turn it on again).
Note that screen brightness is also ef-
fected by the Power Mode selected.
Volume
The Volume icon will show the cur-
rent volume level. You can use the
slider to adjust the volume or the Fn +
F5/F6 key combinations, or use the
Fn + F3 key combination to mute the
volume.
9