Bottom View - Model C - Schenker N151RF1 User Manual

Quick Start Guide
1
Figure 1 - 14
Bottom View
Model C
1. Fan Outlet/Intake
2. Battery
3. HDD Bay

Battery Removal
Note that the built-in
battery is not user re-
movable. Removing the
battery will violate the
terms of your warranty.
If you need to remove the
battery for any reason,
please contact your dis-
tributor/supplier for fur-
ther information.

1 - 24 Bottom View - Model C

Bottom View - Model C
1
2
Battery Information
Always completely discharge, then fully charge, a new battery
before using it. Completely discharge and charge the battery
at least once every 30 days or after about 20 partial discharg-
es. See "Battery Information" on page 3 - 17
tions.
1
1
3

for full instruc-

Overheating
To prevent your comput-
er from overheating
make sure nothing
blocks the vent(s)/fan in-
take(s) while the com-
puter is in use.
Bottom Cover Removal
Warning
Do not remove any cov-
er(s) and /or screw(s) for
the purposes of device
upgrade as this may vio-
late the terms of your
warranty.
If you need to replace/re-
move the hard disk/
RAM/optical device etc.,
for any reason, please
contact your distributor/
supplier for further infor-
mation.