Step 4: Connect External Devices And Cables; Tools Required To Connect External Devices And Cables; Management; Device - Juniper ACX1100 Quick Start Manual

Universal access router
Hide thumbs Also See for ACX1100:
Table of Contents

Advertisement

ACX1000 and ACX1100 Universal Access Routers Quick Start

Step 4: Connect External Devices and Cables

Tools Required to Connect External Devices and Cables

Connect the ACX Series Router to a Network for Out-of-Band Management
Connect the ACX Series Router to a Management Console or Auxiliary Device

Connect Network Interface Cables to the ACX Series Router

12
Figure 9: Ethernet Cable Connector
Tools Required to Connect External Devices and Cables on page 12
Connect the ACX Series Router to a Network for Out-of-Band Management on page 12
Connect the ACX Series Router to a Management Console or Auxiliary Device on page 12
Connect Network Interface Cables to the ACX Series Router on page 12
To connect external devices and cables to the router, you need the following tools:
Ethernet cable with an RJ-45 connector attached (provided)
RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC, with an Ethernet port (not provided)
Turn off the power to the management device.
1.
Plug one end of the Ethernet cable
2.
the
port on the front of the chassis.
MGMT
and
Figure 3 on page 5
Plug the other end of the cable into the network device.
3.
Turn off the power to the console or auxiliary device.
1.
Plug the RJ-45 end of the serial cable
2.
the
port on the front panel.
CONSOLE/AUX
and
Figure 3 on page 5
Plug the female DB-9 end into the device's serial port.
3.
Have ready a length of the type of cable used by the network ports. For cable
1.
specifications, see the
ACX1000 and ACX1100 Universal Access Routers Hardware Guide
NOTE:
Shielded cables are required for outside deployment.
Remove the rubber safety plug from the cable connector port.
2.
(Figure 9 on page 12
Figure 1 on page
show the port.
(Figure 9 on page 12
Figure 1 on page
show the port.
shows the connector) into
4,
Figure 2 on page
shows the connector) into
4,
Figure 2 on page
Copyright © 2015, Juniper Networks, Inc.
4,
4,
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx1000

Table of Contents