Dl330 And Dl330P With D3-232-Dcu; Handshake None - Allen-Bradley SLC 500 Manual

Port Button
Click the Port button to display the Serial Parameters dialog. The port values are automatically set to
standard default values. The following settings are recommended for Direct 305 DirectNET.
Elect. Format RS232
Baud Rate 9600
Data Bits 8
Parity None
Stop Bits 1
Handshake None
Protocol Button
Click the Protocol button to display the dialog box associated with the Direct 305 DirectNET PLC.
Enter the Source ID (QuickPanel ID) and Destination ID (PLC ID). The Timeout setting is correct for
most applications.
Click OK to return to the Project Setup dialog box.

DL330 and DL330P with D3-232-DCU

The DL330 and DL330P have no DirectNET ports and must use a D3-232-DCU Data Communication
Module to connect to the DirectNET. Use the HMI-CAB-C53 Cable for connecting a QuickPanel to a
Direct Logic DL330/DL330P with D3-232-DCU. These modules support baud rates to 19.2K. Make
sure the baud rate on the module matches the baud rate on the QuickPanel.
176 • • • • PLC Direct
QUICKDESIGNER