Allen-Bradley SLC 500 Manual page 113

Hide thumbs Also See for SLC 500:
Table of Contents

Advertisement

Explanation: (Compiler Error ) The length was not equal to 4.
Error #: 02:9B
Error Msg ERROR 02:9B No digit or . found for the Rx Float in a Receive command
Explanation: A Receive Command was being executed, it was expecting numeric data or a '.' from the
controller but data was not numeric.
Error #: 02:9C
Error Msg ERROR 02:9C Invalid Command Read while processing an Unsolicited Sequence
Explanation: (Compiler Error ) A Command read while processing an Unsolicited Sequence was
invalid.
Error #: 02:9D
Error Msg ERROR 02:9D While processing an Unsolicited Command a match was not found
Explanation: An Unsolicited Command was received by the Quick Panel which did not have a match
in the table of Unsolicited Sequences.
Error #: 02:9E
Error Msg ERROR 02:9E Invalid Start of the Unsolicited Commands
Explanation: (Compiler Error )The first step of an Unsolicited Command was not a receive command.
Error #: 02:9F
Error Msg ERROR 02:9F Rcv Command failed on the 2nd Rcv of an Unsolicited Cmd
Explanation: A Unsolicited Sequence was being executed and the second Receive Command of the
Unsolicited Sequence failed.
Error #: 02:A0
Error Msg ERROR 02:A0 Rcv Buffer over flowed on the 2nd Rcv of an Unsolicited Cmd
Explanation: A Unsolicited Sequence was being executed and the second Receive Command of the
Unsolicited Sequence failed because the Receive Buffer over flowed. The End of Packet character
may be incorrect.
Error #: 02:A1
Error Msg ERROR 02:A1 Comm time-out on the 2nd Receive of an Unsolicited Cmd
Explanation: A Unsolicited Sequence was being executed and the second Receive Command of the
Unsolicited Sequence failed because the Communications Timed out wait for a packet.
Error #: 02:A2
Error Msg ERROR 02:A2 Could not release the RAM for the Poll Table
Explanation: Memory was dynamically allocated, and an attempt was made to free the RAM (probably
by going into a off-line mode) and it was unsuccessful.
Error #: 02:A3
Error Msg ERROR 02:A3 Ran out of RAM trying to allocate RAM for the Poll Table
Explanation: A problem occurred trying to dynamically allocate RAM for the Poll table.
Error #: 02:
Error Msg ERROR 02:A4 Error Allocating Memory for the Rx table
Explanation: A problem occurred trying to dynamically allocate RAM for the Rx table .
ASCII Flex Protocol • • • • 281
QUICKDESIGNER

Advertisement

Table of Contents
loading

Table of Contents