Allen-Bradley SLC 500 Manual page 31
Hide thumbs
Also See for SLC 500:
- Reference manual (694 pages) ,
- Quick start manual (70 pages) ,
- Migration manual (60 pages)
Table of Contents
Advertisement
Note:
The format for tag variables for the PLC-5 is:Xf:e.s/_d, where the _d is defined as the destination
address. However, the destination address is not supported in Full Duplex protocol. The destination
address is ignored because it's talking to the program port. Half Duplex does support the _d destination
address.
Just as a reminder, when working with Full Duplex, you have to set up the PLC Channel 0 to Point-to-
Point. For Half Duplex, Channel 0 must be set to System (Slave).
Allen-Bradley • • • • 41
QUICKDESIGNER
Advertisement
Table of Contents
