Baby Bottles - Miele G 7825 Operating Instructions Manual

Areas of application
E 750 frame
24

Baby bottles

Baby bottles can be processed in the two lower levels of mobile unit
E 735/1 in E 135 containers. E 364 containers with wide-necked teats
and E 458 containers with screw-cap teats can also be placed in the
upper level of the mobile unit.
– Ensure the level marker on the bottles is machine-washable
– If there is a delay of 4 hours or more before bottles can be washed,
fill them with water to prevent residues from drying on.
If the process is not to be followed by sterilisation, the load should
be dried completely to avoid the development of water-borne bac-
teria.
A sufficient drying time is therefore absolutely essential.
Inserts for baby bottles and teats are supplied with their own operat-
ing instructions.
Place the frame centrally in the top level of the E 735/1 mobile unit.

Hook one E 135 container onto each side of the frame.

The angled positioning of the containers ensures that the jets of water
reach right into the bottles.