Cleaning The Spray Arms - Miele G 7825 Operating Instructions Manual

Spray arms in the
wash cabinet
Spray arms in
mobile units/mod-
ules:

Cleaning the spray arms

Waste particles can lodge in the spray arm jets.
It is therefore important to inspect the spray arms regularly.
Use a sharp pointed object to push particles into the spray arm jets,

and rinse well under running water.
Remove the spray arms as follows:
Take any mobile units out of the wash cabinet.

Loosen the fastening on the spray arm with an SW 60 spanner and

pull the spray arm upwards or downwards to remove.
Turn the nut (left hand thread) together with the spray arm clock-

wise and then pull the spray arm downwards and off.
If there is considerable visible wear on the bearing on the spray arm,
contact Miele Service as this can result in functional problems.
After cleaning the spray arms screw them back into position.

After replacing the spray arms, check that they rotate freely.
Maintenance
53