Printer (Optional); Renewing The Paper Roll; Replacing The Cartridge - Miele G 7825 Operating Instructions Manual

Maintenance
Renewing the pa-
per roll
Replacing the
cartridge
56

Printer (optional)

A red indicator light behind the front panel of the printer will light up
when the printer roll is finished. Check how much paper is left on the
roll, regularly. To do this:
Open the front panel of the printer at the upper edge and then open

it downwards.
Take the empty roll together with its spindle from the roller holder, fit

the new roll on the spindle and put back in place.
Guide the paper up and over the paper feed roller (slot behind the

ribbon), ensuring that the grey paper feed button is kept pressed in
until the paper emerges above the ribbon.
Guide the paper through the slot in the front panel, then close the

front panel.
Replacement paper rolls (58 mm wide, outer diameter approx. 50
mm) can be purchased from the Miele Spare Parts Department or
from an office stationery supplier.
Open the front panel of the printer at the upper edge and then open

it downwards.
Pull the cartridge (above the paper roll) forward and out of its

holder, then put in a new one. Ensure the paper still passes
between the ribbon and the cartridge.
Turn the small wheel for manual ribbon feed on the right in a clock-

wise direction until the ribbon is taut.
Guide the paper through the slot in the front panel, then close the

front panel.
Replacement colour ribbon cassettes can be bought from the Miele
Spare Parts dept or from an office stationery supplier.