The Base Station At A Glance - Swisscom Aton CL110 Manual

The base station at a glance

The base station at a glance
You can use the keys on the base station to
register handsets to the base station,
search for handsets (paging),
and operate the integrated answer
machine (Aton CLT110 only).
Aton CLT110 base station
6
5
7
1 Registration/paging key:
Press briefly: Search for handsets (paging),
¢
page 45.
Press and hold: Register handsets and DECT
¢
devices, page 45.
2 On/Off key: Activate/deactivate answer ma-
chine.
LED lights up: Answer machine is activated.
LED flashes: The answer machine is record-
ing a new message.
2
During message playback:
3 Play/Stop key:
¢
page 45
4 Skip to next message (press once) or next
5 Skip back to beginning of message (press
6 Delete current message.
7 Adjust volume during message playback:
Please note:
u
u
2
1
4
Aton CL110 base station
3
Play back new messages from answer
machine or cancel the playback (press
briefly).
Play back new and old messages (press and
hold).
LED flashes: At least one new message is
present.
LED flickers: Memory is full.
message but one (press twice).
once) or to previous message (press twice).
ð ñ
= quieter; = louder.
While an external call is being signalled:
adjust ringer tone volume.
If the answer machine is being oper-
ated from a handset or if it is recording
a message, it cannot be operated from
the base station.
If the LED flashes although the answer
machine is switched off, it means that
there is still at least one new message
that has not been played back yet.
Registration/Paging key:
– Press briefly: Search for handsets
¢
(paging), page 45.
– Press and hold: Register handsets and
¢
DECT devices, page 45.