Connecting The Base Station; Connecting The Charging Cradle (If Included) - Swisscom Aton CL110 Manual

Table of Contents

Connecting the base station

First connect the

mains adapter 1.

Then connect the

telephone jack

and insert the cables

into the cableducts.

Please note:

The mains adapter

must always be con-

nected, as the phone

will not operate with-

out mains connection.

Only use the mains adapter and phone cord supplied. Pin connections on

telephone cables can vary (pin connections

If you need to disconnect the plug from the

charging cradle, press the release button

and disconnect the plug 2.

Connect the flat plug of the mains

adapter 1.

Plug the mains adapter into the plug

socket 2.

page 55).

First steps

Table of Contents

Do you have a question about the Aton CL110 and is the answer not in the manual?

Aton clt110