Minimal Radiation (Eco Mode Plus); Range Reduction (In The "Eco Mode" Menu) - Swisscom Aton CL110 Manual

Minimal radiation
(Eco Mode plus)
The Aton CL110/CLT110 with its preset
Eco Mode plus switches off all radiation
when in idle status. During a call, the
handset reduces the transmission power
according to the distance from the base
station. Eco Mode plus has already been
activated on your Aton CL110/CLT110.
Eco Mode plus is indicated by the ½ icon
in the top left of the device display.
Deactivation
¢ ¢
Settings
§Menu§
¢ ¢
Additional Eco Mode+
Press the display keys (
Range reduction (in the
"Eco Mode" menu)
Reducing the range indoors to 10–20 m
can cut the transmission power of the
handset and the base station during a call
by 80% (compared with the transmission
power at a range of 40 m).
After activating the reduction option,
please check that the new range of the
device still meets your needs.
Activating range reduction
¢ ¢
Settings
§Menu§
¢ ¢
Additional Eco Mode
Press the display keys (
¢
Base OK
¢
OK
= off)
¢
Base OK
¢
OK
‰
= on)

Minimal radiation (Eco Mode plus)

Important information when using
Eco Mode plus
u
When Eco Mode plus is enabled, call
setup will be delayed by approx. 2 sec-
onds and the handset standby time will
be reduced by approx. 50% due to the
regular connection monitoring.
u
When Eco Mode plus is enabled, press
and hold the talk key c to check that
the base station can be reached. If it
can be reached, you will hear the ring-
ing tone.
u
If you listen in on the Aton CL110/
CLT110 using a handset that does not
support Eco Mode plus, this will be
deactivated for all Aton CL110/CLT110
components.
u
The range reduction option can also be
used separately from Eco Mode plus.
u
Eco Mode/Eco Mode plus and repeater
¢
support ( page 50) cannot be used
at the same time. Range reduction and
Eco Mode plus will be deactivated if
you use a repeater.
43