Making Internal Calls; Listening In To An External Call (Conference) - Swisscom Aton CL110 Manual

Using several handsets

Making internal calls

Internal calls to other handsets registered
on the same base station are free.
Calling other handsets
k
Start internal call. The display
shows
Insert INT
~
Enter the internal number of
the receiving handset and
press
§OK§
called.
or:
Press the display key and
§All§
All handsets are called.
Ending a call
a
Press the end call key.
Transferring a call to another handset/
making an internal consultation call
You are talking to an external participant
and can call an internal participant at the
same time to forward the call or to con-
sult.
¤
Calling internal participants
When an internal participant answers:
¤
If necessary announce the external call.
Either
a
Press the end call key. The call
is transferred.
or
Ç
Press the display key. You are
reconnected with the external
participant.
When transferring a call you can also press
the end call key a before the internal
participant answers. Then, if the internal
participant does not answer or the line is
busy, the call will automatically return to
you (the display will show Recall).
46
No..
. The handset is
§OK§
Answering a waiting call
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number will
appear in the display if phone number
identification is enabled.
a
Press the end call key to end
the internal call.
c
Press the talk key to take the
external call.
Listening in to an external call
(conference)
.
You are conducting an external call. An
internal participant can listen in on this
call and take part in the conversation.
A signal tone and
display indicates the inclusion of a new
participant to the conversation to all par-
ticipants
Precondition: The
must be activated.
Activating/deactivating listening in
¢
Settings
§Menu§
¢
Listening in
a
Press and hold (idle status).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. You want to listen in to the
external call.
c
Press and hold the talk key.
You are linked into the call. All participants
hear a signal tone.
in the display.
Ending listening in
a
An internal participant presses
the end call key.
All participants hear a signal tone.
Conference Call on the
function
Listening in
¢
Base
(‰ = on)
Conference Call appears