Connecting The Phone To A Pabx; Dialling Modes And Recall; Setting Pauses - Swisscom Aton CL110 Manual

Connecting the phone to
a PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.

Dialling modes and recall

The current setting is indicated by
Setting recall
For operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
M 4 O 2
§Menu§
~
Enter digits for the recall time
and press
0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 180 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
a
Press and hold (idle status).
‰
.
.
§OK§

Connecting the phone to a PABX

Setting pauses

Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
M 4 O O
§Menu§
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec) and press
a
Press and hold (idle status).
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
M 4 O 4
§Menu§
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
a
Press and hold (idle status).
.
OK
§ §
.
OK
§ §
51