Sms (Text Messages); Writing/Sending An Sms - Swisscom Aton CL110 Manual

SMS (text messages)

SMS (text messages)
Your phone is supplied ready for sending
SMS messages immediately.
Please note:
When supplied, the access number
(062 210 00 0*) for the Swisscom SMS centre
is pre-programmed.
Preconditions:
u
Calling Line Identification is enabled for
your telephone connection.
u
Your network provider supports SMS in
the fixed line network (information on
this can be obtained from your network
provider).
SMS messages are exchanged between
SMS centres operated by service provid-
ers. You must enter the SMS centre
through which you wish to send and
receive SMS messages into your phone.
You can receive SMS messages from every
SMS centre that is entered.
Your SMS messages are sent via the SMS
centre that is entered as the active send
service centre. However, you can activate
any other SMS centre as the active send
service centre to send a current message
¢
( page 35).
The following SMS centre is pre-program-
med:
– 062 210 00 0* (Swisscom)
Should you have any questions regarding
the SMS service, please contact your
provider.
If no SMS service centre is entered,
the SMS menu only contains the entry
Settings. Enter an SMS Service Centre
¢
( page 35).
Information on writing an SMS can be
found in the appendix (
SMS may contain up to 160 characters.
32
¢
page 56). An
Please note:
u
Each incoming SMS is signalled by a
single ring (ringer as for external calls).
If you accept an SMS "call", the SMS will
be lost. To prevent this ring, suppress
the first ring for all external calls
¢
( page 49).
u
If your phone is connected to a PABX,
please read page 35.

Writing/sending an SMS

¢ ¢
SMS Write Message
§Menu§
~
Write an SMS. For how to enter
¢
text,
¢
Send Text
§Menu§
Select and press
s / ~
Enter the number with area
code (including your local area
code) from the directory or key
it in manually, and press
The SMS is sent.
Please note
u
If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft
message list.
u
If the memory is full, or if the SMS
function on the base station is
being used by another handset, the
operation is cancelled. An appropri-
ate message appears in the display.
Delete SMS messages you no longer
require or send the SMS later.
page 56.
.
§OK§
§OK§
.