Activating/Deactivating Muting For The First Ringer Tone; Advisory Tones; Restoring The Handset To The Factory Settings; Base Station Settings - Swisscom Aton CL110 Manual

Activating/deactivating muting
for the first ringer tone
Press the display key.
§Menu§
M 4 O 2 2
Press keys.
Q
Make the first ring audible.
§OK§
Or:
Mute the first ring.
§OK§

Advisory tones

Your handset uses "advisory tones" to tell
you about different activities and statuses.
The following tones can be activated and
deactivated independently of each other:
u
Advisory tones:
– Key click: every key press is con-
firmed.
– Confirmation tone (rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
an SMS or a new entry in the answer
machine list or the calls list.
– Error tone (descending tone
sequence): when you make an
incorrect entry.
– Menu end tone: when scrolling at
the end of a menu.
u
Battery low beep: the battery requires
charging.
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Activating/deactivating advisory tones
¢ ¢
Settings
§Menu§
¢
Advisory Tones
Select and press
Audio Settings
(‰ = on).
§OK§
Setting the battery low beep
¢ ¢
Settings
§Menu§
¢
Battery Low
/ /
On Off During Call
Select and press
The battery low beep is acti-
vated or deactivated or sounds
during a call.
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list or
SMS lists, or the handset's registration to
the base station.
¢ ¢
Settings
§Menu§
¢
Reset Handset
Confirm query with
Ç
.
a
Press and hold (idle status).

Base station settings

The base station settings are carried out
using a registered handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
You may have to enter the system PIN into
the base station when manually register-
ing a handset.
Changing the system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
¢ ¢
Settings
§Menu§
Base station settings
Audio Settings
(‰ = on).
§OK§
Handset
or reject it with
§OK§
¢
Base System PIN
49