Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Swisscom Aton CL110 Manual

Submenus
The functions in the submenus are displayed as lists.
To access a function:
¤
Scroll to the function with the control key q and press
Or:
¤
Enter the corresponding digit combination (
Briefly press the end call key a once to return to the previous menu level/
cancel the operation.
Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤
Press and hold the end call key a.
Or:
¤
Do not press any key: after 2 minutes the display will automatically revert
to idle status.
Any settings you have not confirmed by pressing
An example of the display in idle status is shown on

Activating/deactivating the handset

a

Activating/deactivating the keypad lock

The keypad lock prevents any inadvertent use of the phone.
#
When the keypad lock is activated you will see the Ø icon on the display and
a message when you press a key.
The keypad lock is deactivated automatically if someone calls you. It is reacti-
vated when the call is finished.
With the phone in idle status, press and hold the end call key (con-
firmation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Press and hold the hash key to activate or deactivate the keypad
lock. You will hear the confirmation tone.
Using the phone
.
§OK§
¢
page 23).
will be discarded.
§OK§
¢
page 17.
21