Welding Task Selection; Arcforce; Hotstart; Antistick - EWM Taurus 351 Basic FKG Operating Instructions Manual

Design and function
MMA welding
5.4.2

Welding task selection

5.4.3

Arcforce

Setting:
•
Negative values: rutile electrode types
•
Values at zero: basic electrode types
•
Positive values: cellulose electrode types
5.4.4

Hotstart

The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time
5.4.5

Antistick

48
Figure 5-22
Figure 5-23
Figure 5-24
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the machine
automatically switches over to the minimum current within about 1
second to prevent the electrode from overheating. Check the welding
current setting and correct according to the welding task!
Figure 5-25
099-005425-EW501
14.07.2016