EWM Taurus 351 Basic FKG Operating Instructions Manual page 34

Design and function
MIG/MAG welding
•
Insert the central plug for the welding torch into the central connector and screw together with crown
nut.
•
Insert the plug on the workpiece lead into the "-" welding current connection socket and lock.
•
Welding current lead, insert polarity selection into the "+" welding current connection socket and lock.
•
Insert the welding torch control cable into the 19-pole connection socket and lock (MIG/MAG torches
with additional control cables only).
Where applicable:
•
Lock connecting nipples of the cooling water tubes into the corresponding quick connect couplings:
Return line red to quick connect coupling, red (coolant return) and
supply line blue to quick connect coupling, blue (coolant supply).
34
099-005425-EW501
14.07.2016