Geometry Menu - Digital Projection Titan Pro Series 3 Installation And Quick Start Manual

Digital Projection
Titan Pro Series 3

Geometry menu

•
Aspect Ratio
Choose between Source , Fill Display
Some devices (eg certain DVD players) pack a 16:9 image into a 4:3 aspect ratio. In such cases
to display the image correctly, choose the Anamorphic aspect ratio.
•
Overscan
Set this slider to compensate for noisy or badly defined image edges.
•
Mode
Choose from Keystone , Cornerstone
•
Set the and
H Keystone V Keystone
being in a different horizontal or vertical plane to the screen.
•
Set the Pincushion / Barrel slider to correct for any distortion caused by the screen being
concave or convex.
•
Set the Rotation slider to rotate the image on the screen.
•
Warp Map
Using an external Digital Projection computer application, up to eight customised warp maps can
be created and uploaded to the projector. If
uploaded, you can select from the drop-down list.
Rev D November 2012
, Fill & Crop , Anamorphic and TheaterScope
, Rotation , Warp Map or Off .
sliders to correct for any distortion caused by the projector
Warp is selected, and any warp maps have been
A TOUR OF THE MENUS
.
Operating Guide
Notes
Main Menu
Geometry
An anamorphic lens (optional
accessory) is used with the
TheaterScope setting, to ensure
that for a 2.35:1 image, the
maximum area of the DMD is used,
giving maximum image brightness.
For examples of how the different
aspect ratios affect screen
dimensions, see Aspect Ratios
Explained in the Reference Guide.
Op 10