Geometry Menu; Horizontal Position; Vertical Position; Aspect Ratio - Digital Projection TITAN sx+600 User Manual

4. Controlling the projector

Geometry menu

To return to the main menu, press
From the main menu:
• Press and
Press to open the Geometry menu. The blue highlight moves to the first item
in the menu.
Input
Picture
Geometry
Colour
Setup
Information

Horizontal Position

• Press and
Press and

Vertical Position

• Press and
Press and

Aspect Ratio

• Press and
Fill
User Aspect
1.33:1 (4:3)
1.6:1 (16:10)
1.78:1 (16:9)
2.35:1 (Scope)
1.66:1 (Vista)
1.85 (Flat)
Native
Page 4.24
Downloaded From projector-manual.com Digital Projection Manuals
up to three times.
until Geometry is highlighted.
H Position 128
V Position 64

Aspect Ratio

User H Aspect 500
User V Aspect 500
Keystone
0
Phase 127
Resolution
Blanking
to select H Position.
to adjust the slider.
to select V Position.
to adjust the slider.
to select from:
This will best fit the incoming source to fill either the height or
width without changing the aspect ratio of the source.
The image will be displayed pixel for pixel. The image will be
centred, with a black border if smaller than native resolution or
cropped if larger.
Digital Projection
1.85:1 (Flat)
User Manuall
TITAN sx+600/700.
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
When using the menus, press
OSD
or
reveal the On-Screen-Display.

Geometry Menu

Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
Aspect Ratio selection can be
found in both the Picture and
Geometry menus.
When User Aspect is selected,
the Aspect Ratio settings are
taken from the User H Aspect
and V Aspect settings (see
next page).
Rev C August 2009
to hide or