Firmware Updates; Determining The Firmware Version; Using Global Configurator And Toolbelt; Using A Web Browser - Extron electronics IPCP Pro 250 User Manual

Firmware Updates

If the need arises, you can replace the IPCP firmware without opening the unit or changing
firmware chips. This section covers the following aspects of how to do that:
•
•

Determining the Firmware Version

There are several ways to check which version of firmware the control processor is using:
•
•
•
Before using any of those methods, connect the control processor and the PC to the
same network. For details see the
on page 7, the
page 25, and the IPCP Pro Series Setup Guide.

Using Global Configurator and Toolbelt

1.
2.
3.
4.

Using a Web Browser

The control processor comes with a set of factory default embedded Web pages. Also, after
configuration, the GlobalViewer (GV) application could be installed in the unit, providing a
different set of Web pages. See the Global Configurator Help file for information on how to
use that software and the resulting Web pages. Either type of Web page (factory default or
GV) can be used to find the firmware version and part number of the unit.
1.
2.
3.
Determining the Firmware Version
Updating the Firmware
View the device information in Toolbelt.
View the general status information section of the IPCP embedded Web pages.
View the GlobalViewer (GV) Web pages (if the control processor has already been
configured and the GV Web pages have been generated, built, and uploaded to the
control processor).
Software-Based Configuration and Control
Start Global Configurator in either GC Professional or GC Plus mode.
Open the Toolbelt software.
Either add the desired control processor manually or start device discovery and select
the desired processor from the list of discovered devices.
Click Manage in the row for the desired control processor and view the device
information that appears in that section.
Start a Web browser program.
Type the IP address of the control processor into the address field of the browser and
log on to the internal Web page or to the optional GlobalViewer Web page stored in the
control processor (see the Global Configurator Help file for details).
Look for the general device or status information section.
Hardware Features and Installation
IPCP Pro Series • Firmware Updates
section starting
section starting on
36