Troubleshooting - Electrolux EOAP5803A Manual

Table of Contents

Advertisement

36
www.electrolux.com
12.5 Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
You cannot activate or op-
erate the oven.
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
The oven does not heat up. The necessary settings are
4. Install the glass cover.
The side lamp
1. Remove the left shelf support to get
2. Use a narrow, blunt object (e.g. a
3. Clean the glass cover.
4. Replace the lamp with a suitable 300
5. Install the glass cover.
6. Install the left shelf support.
Possible cause
The oven is not connected
to an electrical supply or it
is connected incorrectly.
not set.
access to the lamp.
teaspoon) to remove the glass cover.
°C heat-resistant lamp.
Remedy
Check if the oven is correct-
ly connected to the electri-
cal supply (refer to the con-
nection diagram if available).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.

Advertisement

Table of Contents
loading

Table of Contents