Wiring Diagram - Makita JV0600 Technical Information

W
iring diagram
Fig. D-2
Set Brush holder to housing set L as per illustrated direction
below.
Note: Do not route Lead wire from Brush holder under
the Brush holder itself.
Fig. D-3
Route the Lead wires in between the Ribs setting
Controller and Terminal block.
Note: Do not let Lead wires cross over the Ribs.
Controller's Lead wire
(red) has to be connected
to Brush holder B.
Put Field lead wires
under Brush holders.
Route Controller's
lead wire (blue, or
white) into the Lead
wire holder here.
Opening for
connecting
Lead wire
Housing R side
Controller
Noise suppressor
Brush
holder B
Brush
holder A
Housing L
Switch
Terminal block
Field
P 12/ 12
Housing L