Download Print this page

Wiring Diagram - Makita RP1110C Technical Information

8mm router plunge type
Hide thumbs Also See for RP1110C:

Advertisement

W
iring diagram
Model RP1110C
Pass lead wire of controller
between boss and rib.
Controller
A : View from top
B : View from
A : View from top
Rib
Boss
Pass lead wire of
controller between
boss and rib.
knob R side
B : View from knob R side
Boss
Pass lead wire of support (field)and
the same of controller, in the groove.
Put insulated terminal
and slacked lead wires
in this place as per
the illustration.
Sponge
Pass lead wires to be connected to
switch, as per the illustration.
Terminal block
Fix lead wires to be connected to
terminal block, with lead holder.
And set the lead wires of noise suppressor
inside of the machine (armature side), when
fixing them with lead holder.
Noise suppressor
Cover noise suppressor with sponge
and set its lead wires in side of the
machine (armature side).
Sponge for dust protector
installed in knob R
Lock
off button
Switch
Wiring in knob R
P 5 / 6
Trigger

Advertisement

loading

This manual is also suitable for:

Rp0910