Makita JV0600 Technical Information page 9

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Slider section, Toolless Blade Clamp Mechanism
ASSEMBLING
(1) Assemble Blade clamp mechanism as illustrated in Fig. 13.
Fig. 13
1. Put Compression spring 4
and Lock pin into the hole
of Rod.
Lock pin
Compression
spring 4
Rod
4. Insert the Rod into
Insert holder, while
aligning the Tail of
Torsion spring to the
Groove on Slider
support.
2. Mount Torsion
spring 10.
Torsion
spring 10
5. While twisting Rod and
Insert holder each other,
push the Rod deep into
Insert holder.
So, the Rod and Insert
holder fit each other with
click.
3. Insert Pin 2 into
the hole illustrated
below.
Pin 2
6. Secure the Rod to
Insert holder with
Retaining ring R-13
and mount Dust cover.
Dust cover
1R173
1R381
Retaining
ring R-13
P 9/ 12