Makita JV0600 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Housing
DISASSEMBLING
(1) Remove Base section for disassembling Housing. See Fig. 2.
Fig. 2
1. Inserting Slotted head screwdriver
into the cut portion, remove Lever 8
by levering up it with the screwdriver.
Lever 8
2. Remove M4x20 hex socket head boot with
wrench 3.
M4x20
Hex socket head bolt
Hex wrench 3
(Standard equipment)
4. Remove Housing cover.
< Note in Disassembling >
Be careful not to lose Compression spring 4
and Steel ball 4 in this step.
3. Separate Base section from the Machine.
And then, remove M4x12 Hex socket head bolt with
which Housing cover is secured to Housing set with
the same Wrench.
Base
Clamp plate
M4x20
Hex socket head bolt
Housing cover.
Compression spring 4
Steel ball 4
5. Remove Safety wire.
P 3/ 12
Housing cover
M4x12 Hex
socket head bolt
Base
Safety wire