Makita JV0600 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Crank Mechanism
ASSEMBLING
(5) Turning Armature, move Crank pin of Gear complete to the highest point from the edge
of Housing set (L), for easy assembling of Slider section. Refer to the center illustration in Fig. 4.
And mount slider section to Housing set (L). Refer to the center illustration in Fig. 4.
(6) Mount Leaf spring and Slider guide plate as illustrated in Fig. 9.
Fig. 9
Slider guide plate
(7) Before assembling Housing set (R.), make sure that two Holders and Retainer complete are mounted to
Housing set (L). See Fig. 10.
Fig. 10
Leaf sprig
Fig. 8
two Holders
Holder as a Screw hole for securing
Base and Housing cover
Mount Leaf spring, facing its cut portion
to Rod side.
Mount Slider guide plate,
facing its short leg to Housing
set (L) side.
Retainer complete
P 7/ 12