Check After Repair; Circuit Diagram / Wiring Diagram - Makita DMP180 Repair Manual

5

Check after REPAIR

1
Check the operation of the repaired machine.
 Check that neither abnormal noise nor leakage of compressed air happens.
 Check that the digital monitor is displayed, and the LED light is light up.
2
Check by putting air into the tires of the car, etc.
 Check that the pressure rises to the specified tire pressure.
 Measure the time from when the tire air is deflated condition to when it reaches the specified pressure.
3
Check that the air can be inflated at the same time as other machines.
6

CIRCUIT DIAGRAM / WIRING DIAGRAM

LED PCB
Fig.17
Digital display
Battery terminal
9 / 9
Switch
Power on/off
Motor
Terminal protector