Safety Instructions; General Descriptions - Eneo VK-1318/WDDG1 Installation And Operating Instructions Manual

1. General Description
• For ceiling and wall mounting
• Weatherproof and vandal-resistant design
• Clear polycarbonate dome with black interior insert
• 1/4" or 1/3" CCD B/W or colour board camera with various functions
• Easy to mount for interior or exterior use

2. Safety Instructions

• The instructions below must be followed for your own safety.
• Please read the safety instructions and operating instructions before connecting the device and putting it into
operation.
• Keep the operating instructions safe for use at a later date.
• Never operate the camera outside of the specifications as this may prevent the camera functioning.
• Never point the camera towards the sun with the lens open as this may prevent the sensor functioning.
• When laying the connection cable, it is essential to follow the instructions below: the cable must be laid in such
a way that it is not strained, bent or damaged and no moisture can penetrate.
• Installation and maintenance of the system may only be carried out by persons with appropriate authorisation
for this and in accordance with the installation instructions – taking into account all the applicable standards and
guidelines.
• The installer is responsible for maintaining IP 66/67.
• Only use rust-proof screws should be used to mount the housing and camera outside.
• Only original spare parts from the manufacturer may be used with the „eneo camera package".
Maintenance:
• In order to get a clear picture, it is necessary to clean the dome regularly.
• Wipe it with a soft, damp cloth.
• Never clean the housing and dome with thinner, petrol or a scourer as this could cause permanent damage
to the surface.
14