Description Of The Possible Settings For Various Camera Packages - Eneo VK-1318/WDDG1 Installation And Operating Instructions Manual

6. Description of the Possible Settings for Various Camera Packages

A
LEVEL
Level and phase
control (A, B)
LEVEL potentio- IRIS
meter control
PHASE potentio- PHASE
meter control for
vertical phase
DSS, digital slow
shutter and
integrated picture
store (C)
SW1 up (NOR)
NOR (off)
SW1 down (ON)
DSS (ON)
SW2 up (SW1
x32
must be at DSS)
SW2 down (SW1
x16
must be at DSS)
DN, day/night
switch, IR mode
(C)
SW1 up (NOR)
NOR (off)
B
PHASE
For
camera package
VKC-1324/WDDG1/2 Iris control. Correct using potentiometer control for very
VKC-1326/WDDG1/2 over-exposed images or where the contrast is too low.
VKC-1327/WDDG1/2 Adjust using test image (min. 3,000Lux) and oscilloscope
VKC-1414/WDDG1/2 to 1Vp-p signal.
VKC-1326/WDDG1/2 Potentiometer control to adjust the phase for mains
VKC-1327/WDDG1/2 synchronisation.
Adjustment to the same phasing when using several
cameras avoids disruptive post-synchronisation of the
monitor when using video change-over switches
(only possible with models with AC supply voltage).
For
The DSS (Digital Slow Shutter) can be activated or
camera package: deactivated using SW1. When the DSS is activated, the
VKC-1326/WDDG1/2 number of pictures to be saved (x 8/x 16, integrated
picture store) can be set using SW2.
DSS deactivated, i.e. the dome camera acts like a normal
camera.
In this DIP switch position, the digital slow shutter is
activated (i.e. when the light intensity decreases, the slow
shutter is started (the video level rises).
Digital slow shutter with 16 x picture store
Digital slow shutter with 8 x picture store
For
Day/night switch SW1 can be set to ON (DN) or OFF (NOR).
camera package:
The IR cut filter SW2 may be moved to ON (IR) or OFF
VKC-1326WDDG1/2 (NOR).
In the NOR (up) setting, the camera works like a normal
camera and does not change to night mode.
17
C
SW1 / SW2
DSS / DN / IR / NOR
SW1 and SW2